High Quality 19*76mm Self Color Round Link Chain In Rotary Kiln
Kiln chains in welded finish - for highest demands and cost effectiveness
1.Computerized
permanent control of
welding seams
2.Chain testing includes
bending and
breakingload tests
3.Additional tests on
request
4.Manufactures tests
certificate for each
consignment if
required.
| Diameter |
Pitch |
Weight/Ring |
Weight |
| mm / inch |
mm/inch |
kg/lbs |
kg per m/lbs per 100 ft |
| 16 5/8 |
70 2 3/4 |
0.43/0.95 |
6.14 413 |
| 18 5/8 |
100 4 |
0.74/1.63 |
7.40 497 |
| 19 3/4 |
65 2 9/16 |
0.65/1.43 |
10.00 672 |
| 19 3/4 |
70 2 3/4 |
0.63/1.39 |
9.00 605 |
| 19 3/4 |
76 3 |
0.67/1.48 |
8.82 592 |
| 20 3/4 |
65 2 9/16 |
0.67/1.48 |
10.31 693 |
| 20 3/4 |
70 2 3/4 |
0.70/1.54 |
10.00 672 |
| 20 3/4 |
76 3 |
0.75/1.65 |
9.90 665 |
| 20 3/4 |
78 3 5/64 |
0.77/0.70 |
9.87 663 |
| 20 3/4 |
80 3 1/8 |
0.78/1.72 |
9.75 655 |
| 20 3/4 |
100 4 |
0.93/2.05 |
9.30 625 |
| 22 7/8 |
76 3 |
0.93/2.05 |
12.24 822 |
| 22 7/8 |
80 3 1/8 |
0.97/2.14 |
12.13 815 |
| 22 7/8 |
100 4 |
1.14/2.51 |
11.40 766 |
| 23 7/8 |
76 3 |
1.02/2.25 |
13.42 902 |
| 23 7/8 |
80 3 1/8 |
1.07/2.36 |
13.38 899 |
| 23 7/8 |
100 4 |
1.14/2.51 |
11.40 765 |
| 25 1 |
76 3 |
1.23/2.71 |
16.18 1088 |
| 25 1 |
80 3 1/8 |
1.29/2.85 |
16,12 1083 |
| 25 1 |
89 3 1/2 |
1.40/3.09 |
15.73 1057 |
| 25 1 |
100 4 |
1.52/3.35 |
15.20 1021 |
| 28 1 1/8 |
100 4 |
1.95/4.30 |
19.50 1310 |
| 30 1 3/16 |
100 4 |
2.28/5.03 |
22.80 1532 |
offer their expertise for the design of kiln chain systems to reduce energy
costs and increase kiln outputs.
Optimum kiln performance can be achieved with a well designed kiln chain system.
Tonghe provide all elements installed in the kiln, like kiln chains, shackles, hangers, bolts and nuts and give service for process optimisation Kiln chains are mainly used
in the cement, pulp and aluminium industry. A properly designed chain system:
Heat exchange
Material transport
Cleaning kiln shell
Dust emission reduction
Forged and cast finish
Matching to Chain amterial qualities
Shackles are available either in forged or cast finish in many different patterns.
Experience have shown that the kiln chain area the actual temperatures are approx.100-150°C (212-302°F) lower than in the kiln centre,
therefore, a lower heat resi sting grade for shackles and hangers is recommended and more cost effective.
The correct selection of the material quality is essential for a
good service life and, therefore, for the cost effectiveness of a
chain system.
Kiln temperature, kiln gases and type of firing are the primary
components in the selection of material qualities.
Please contact us for further information.
Carbon steels:
In the first kiln sections, where the gas temperature is usually below 500°C, carbon steels can be installed. If mechanical
wear is higher, low alloy steels are recommended which may also be heat treated for lower wear.
Alloy steels:
Compared with carbon steels, low alloy steels have a higher core hardness and will give better service in temperature ram
ges between 300 up to 500°C (560-932°F)
Ferritic steels:
Ferritic steels are very resistant to sulphurous gases, but less suitable for nitriding and/or carburizing atmospheres and highly suitable to kilns fired with gas or oil.
Austenitic Cr-Ni-steels:
Austenitic Cr-Ni steels are more resistant to carburizing \atmospheres, but unsuitable for sulphurous gases.
Austenitic-manganese steels:
Cr-Ni-Mn steels combine the advantages of ferritic and aus-tenitic alloys and are especially suitable in kilns with sulphur containing gases with carburizing conditions.
Further chain material qualities like 1.4571, 1.4833, etc. are available on request.
A well designed kiln chain system can consist of austenitic manganese and ferritic steels if the kiln is fired with pet coke,
coke and waste if the risk of caburizing is small. For high cab-urising atmospheres only austenitic manganese qualities should be installed.
Other chain qualities are available on request.
Ql.Why choose Our Company?
A: We have advanced equipment, an excellent production team, strict quality control, Welcome to visit the factory to confirm
02.Can you accept a sample order?
A: Yes, It is acceptable! We can provide samples for quality inspection
Q3. Can you give me a better price?
A: First, we are a Manufacturer in China. If you have a big demand for a certain quantity, we can offer discounted prices. Please contact us to get some discounts
Q4. Which delivery methods are available?
A: By sea or air.
Q5. How can I place an order?
A: Please provide your reguirements or application and send us an order byE-mail with your detailed information, then we willsend you a PI to confrm Then,,if all information is right you can make a 30% deposit payment. Finally, we will arrange the order as soon as we receive your advance payment!
){kind=link}